Motorized Conveyor Brush Belt Scraper
Application:
1. Belt Width:500~2000(mm)
2. Material humidity:≤5%
3. Applicable for ribbed, plain, grooved or chevron conveyor belts.
4. Working temperature: -40~90 C
5. Suit for all kinds of belt speed
6. Handled material: dry and fine material
Apply to aggregate, sand and gravel, pulp/paper, wood chips, cement, coal, scrap metal, chevron/cleated belts.
Advantages of Motorized Conveyor Brush Belt Scraper:
1. Easy to install.
2. Wear resistant nylon 66 bristles.
3. Easy replacement, just remove the worn strips and insert new strips, no need replace whole brush roller, very cost-efficient.
4. Continuous contact, efficient cleaning, good results.
5. Safe and reliable, longer service life, low maintenance cost.
6. Gentle contact without any wear-out to the belt, extending service life of belt.
Physically lock out and tag the conveyor at the power source before installation.
1. Be sure to read the instructions carefully before installing.
2. Inspect and fill the lubricant oil termly as specified.
3. Install motor to reducer.
4. Rotate the height adjuster to the lowest point.
5. Select position for the brush cleaner, then sling the cleaner by steel cable or 12# iron wire via the shaft necks on two sides to make the brush contact conveyor belt, it is necessary to make the brush parallel to conveyor belt.
Package of Motorized Conveyor Brush Belt Scraper:
http://www.rubberceramiclining.com/